HOVER CRAFT CONTROLLED BY ANDROID

A hovercraft, also known as an air-cushion vehicle or ACV, is an amphibious craft capable of travelling over land, water, mud, ice, and other surfaces.

Hovercraft use blowers to produce a large volume of air below the hull (air cushion) that is slightly above atmospheric pressure. The pressure difference between the higher pressure air below the hull and lower pressure ambient air above it produces lift, which causes the hull to float above the running surface. For stability reasons, the air is typically blown through slots or holes around the outside of a disk- or oval-shaped platform, giving most hovercraft a characteristic rounded-rectangle shape. Typically this cushion is contained within a flexible “skirt”, which allows the vehicle to travel over small obstructions without damage.For more: https://www.skooltek.in/technical-courses/

A hovercraft is a non wheeled vehicle that can hover over land as well as water easily using high powered fans and aerodynamic design. We here propose an advanced hovercraft that uses high RPM motors interfaced with an aver family micron roller to achieve desired functionality. The motor below hovercraft rotates at a very high RPM that allows it to generate a force enough to make it hover on the surface thus reducing the friction below it to minimum. Then we use the motor propeller mounted behind it to push the hovercraft in forward direction. Now we also need to use a servo motor attached to the hovercraft rudder that helps the hovercraft to move in desired directions by bending the air at accurate angles. For more: https://www.skooltek.in/technical-courses/

The system works collectively to hover while continuously managing servo as well as propeller motor to drive the hovercraft as desired. Now to control the hovercraft we here use an android application. The android application sends movement commands to the hovercraft circuit. The circuit consists of an Bluetooth receiver to receive and process these commands. The commands received by receiver are now processed by the micro controller and it then operates all three motors accordingly as desired by the user.